Flsun SR Super Racer Fast Printing Delta 3D Printer Auto Leveling Touch Screen

1,674.00 SR

Quantity

Featured Products

ISDT K2 Air Dual Channel Smart Charger 2-6S AC DC 200w 500w 20A

596.00 SR

Matek M10Q-5883 GPS COMPASS Module

149.00 SR

TBS Crossfire Diversity Nano RX

184.00 SR

RadioMaster Bandit ExpressLRS 915MHz ELRS RF 1W Module TX

367.00 SR 395.00 SR

SUNLU ASA 3D Printer Filament 1.75mm 1KG

73.00 SR 92.00 SR

SUNLU PETG 3D Printer Filament 1.75mm 1KG

39.00 SR 55.00 SR

Flsun SR Super Racer Delta 3D Printer Quiet Fast Speed Max 200mm/s Touch Screen Auto Leveling 260x330mm Print Size

Why choose the Super Racer?

The design philosophy of the SR is High-Speed printing, with no loss of quality.
The SR will work at a default speed of 150mm/s and can be pushed to 300mm/s
It features linear guide rails for smoother movement and 10mm belts to avoid stretching at speed
It will be 260 x 260 x 330 mm build size
Fitted with an SKR 1.3 and 2209 drivers, out of the box* Later deliveries of the printer may come with the Nano V3.0 motherboard. This is an equivalent, higher speed board. Both boards will be identically supported by FLsun.
The unit will run on open sourced Marlin firmware
Carbon Fibre arms

The Super Racer from FLSUN is a very inexpensive delta 3D printer that meets the needs of a large number of target groups and makes ideas come true in no time.

The Delta printer is equipped with numerous smart features such as automatic levelling, a capacitive colour touchscreen and 4 ultra-quiet TMC2209 stepper drivers. The construction volume is 260 x 330 mm.

When compare with FDM 3D Printers, Delta 3D Printers are:

Excellent at printing in HEIGHT
Light, thus easy to move
Instant change of direction possible
More accurate in the centre than on outer limits
Easy to MAINTAIN and UPGRADE
HIGH PRINT SPEED and ACCURACY

Bullet Points:

Capacitive Touch Screen with 8 Display Language
High Printing Speed up to 200mm/s, default 150mm/s
Silent Print, Printing from USB
Support Resume Printing
Auto Leveling Feature

Full metal structure

The elegant all-metal design of the Super Racer not only gives the 3D printer a high-quality look but also guarantees clean movements and less vibration.

Dual gear extruder

A dual gear extruder ensures more torque, stronger extrusion, stability and durability.

Volcano hotend

A Volcano Hotend with a high melting capacity has two turbo fans and a cooling fan installed to prevent the nozzle from clogging.

Such a hotend also allows you to experiment with different nozzle sizes and flow rates and to be more creative and exploratory in 3D printing.

Heating bed with removable glass plate

The coated glass plate and the aluminium plate are attached separately, which makes cleaning, maintenance and dismantling easier. The heated bed can be heated up to 100 ° C and has a good adhesive effect, regardless of whether it is PLA or ABS printing.

Linear rails

The precise linear guide with 10 mm belt, high rigidity and a high-torque, low-noise and fast high-precision stepper motor guarantees not only sufficient power but also the desired accuracy at high printing speed.

3K carbon fibre arm

A high-strength 3K carbon fibre parallel arm ensures the accuracy of the movements and guarantees stability.

Marlin open source software

Based on Marlin 2.0.6. the self-developed open-source firmware supports the resume printing and filament sensor function.

3.5-inch capacitive colour touchscreen

A 3.5-inch capacitive touchscreen with a redesigned user interface and optimised operating logic with user habits supports 8 display languages and has a function for resetting to the factory settings with just one button.