DarwinFPV 7 Inch Long Range Darwin129 FPV Drone Analog Quadcopter GPS BNF ELRS 2.4G
Darwin129 7'' Long Range PNP is a 7'' Quadcopter for long-range. After many attempts and experiments, we have upgraded Darwin129. For example, GPS is changed to M80, the speed of star search is faster and the accuracy is higher, the tail buzzer and 8 high-brightness RGB lights make it easier to locate the drone and so on.
- The motor cable has been changed to silicone cable with sufficient and it won't melt during soldering.
- Add battery pad to prevent effectively the battery from slipping off.
- The VTX antenna is specially designed for long-rang flight, so the transmission distance is much longer.
- The flight controller supports bluetooth function and can be connected to the mobile phone APP quickly. Make drone tuning much more convenient.
- VTX transmission power is increased to 800mW, the transmission distance is more longer.
- The flight controller is installed with silicone dampers, it will reduce effectively the flight controller vibration.
Specification
- Item name: Darwin129 7'' Long Range PNP
- Wheelbase: 280mm
- Motor: 2507 1800KV 3-5S Brushless Motor
- Flight Controller: F4 flight controller
- VTX: 5.8G 40CH 800mW VTX TX805
- Gemfan Flash 7040-3
Flash Durable 3 Blade
7040-Clear 2L2R
Camera upgraded to 1500TVL Darwin B19
2507 1800KV 3-5S Brushless Motor
- Motor KV:1800KV
- Idle Current (Io/10V):0.89A
- Lipo Cell:3-5S
- Weight:39g
- Max Continuous Current:42A
- Max Continuous Power:840W
- Max thrust:1488g(4S/7")
- Configuration:12N/14P
- Motor Resistance (RM):0.0586 Ω
- Stator Diameter:25mm
- Stator Thickness:7mm
- Motor Diameter:30.8mm
- Motor Body Length:20mm
- Overall Shaft Length:35mm
- Prop adapter shaft:M5
- Bolt holes spacing:16mm
- Bolt thread:M3
- Propeller:7”
4In1 50A Blheli_S ESC
- F4-50A stack
- Continuous current: 50A
- Peak current: 60A (10S)
- Lithium battery section number: 2-6S
- BEC: 5V2A
- ESC weight: 10.8g
- Firmware: BL_S
- Maximum support throttle signal: DSHOT600
- Mounting hole: M3 30.5 * 30.5mm
F4 Flight Controller
- Lithium battery section number: 3-6S
- BEC: 10V 1A, 4.5V, 3.3V
- MCU: STM32F405
- Gyro: MPU6000
- OSD: AT7456E
- Firmware: MATEKF405
- Weight: 7.2g
- Mounting hole: M3 30.5 * 30.5mm
- Support barometer, black box
Bluetooth
5.8G 40CH 800mw VTX TX805
- Item name: FPV Transmitter VTX
- Frequency: 5.8G Channels: 40CH
- Input voltage: 7V~24V
- 5V camera supply: 120mA(MAX)----25mW@12V 5V
- camera supply: 200mA(MAX)----200mW@12V 5V
- camera supply: 300mA(MAX)----600mW@12V 5V
- camera supply: 350mA(MAX)----800mW@12V Extra
- features: Smart audio
- Power supply: 5V output for Camera
- Output power: 25mW/200mW/600mW/800mW
- switchable Antenna connector: MMCX
- Cable connector: Solder pads
- Dimensions: 36mm*22mm*5mm,30.5 stackable hole
- Weight: 8g(excluding antenna)
Package
- 1x Darwin129 7'' Long Range BNF ELRS 2.4G
