Menu
Cart 0

DarwinFPV Darwin240 Johnny 5 Inch FPV Drone 4S FreeStyle Racing ELRS

Featured Products

SUNLU ASA 3D Printer Filament 1.75mm 1KG

SUNLU ASA 3D Printer Filament 1.75mm 1KG

71.00 SR 91.00 SR
SUNLU PETG 3D Printer Filament 1.75mm 1KG

SUNLU PETG 3D Printer Filament 1.75mm 1KG

55.00 SR
RadioMaster Bandit BR3 ExpressLRS 915MHz ELRS TCXO Receiver

RadioMaster Bandit BR3 ExpressLRS 915MHz ELRS TCXO Receiver

98.00 SR
RadioMaster TX16S Mark II Max Radio Controller Transmitter

RadioMaster TX16S Mark II Max Radio Controller Transmitter

1,033.00 SR
RadioMaster Bandit Nano ExpressLRS 915MHz RF ELRS 1W Module TX

RadioMaster Bandit Nano ExpressLRS 915MHz RF ELRS 1W Module TX

157.00 SR 196.00 SR
DOGCOM 5200mAh 6S 120C 22.2V LiPo Battery QS8 [DG]

DOGCOM 5200mAh 6S 120C 22.2V LiPo Battery QS8 [DG]

454.00 SR

DarwinFPV Darwin240 Johnny 5 Inch FPV Drone 4S FreeStyle Racing BNF ELRS

DarwinFPV- Johnny 5

  • Wheel base: 240mm
  • Frame arm thickness: 5.5mm
  • Frame kit material: 3K carbon fiber

 

DrawinFPV 2207- 2400KV Brushless Motor

  • Motor KV:2400KV
  • Idle Current (Io/10V):0.81A
  • Lipo Cell:3-4S
  • Weight:36.4g
  • Max Continuous Current:32A
  • Max Continuous Power:765W
  • Configu-ration:12N/14P
  • Prop adapter shaft:M5
  • Bolt holes spacing:16mm
  • Bolt thread:M3

 

4 IN 1 50A BLHeli_S ESC

  • F4-50A stack
  • Continuous current: 50A
  • Peak current: 60A (10S)
  • Lithium battery section number: 2-6S
  • BEC: 5V2A
  • ESC weight: 10.8g
  • Firmware: BL_S
  • Maximum support throttle signal: DSHOT600
  • Mounting hole: M3 30.5 * 30.5mm

 

F4 Flight Controller

  • F4 Flight contro
  • Lithium battery section number: 3-6S
  • BEC: 10V 1A, 4.5V, 3.3V
  • MCU: STM32F405
  • Gyro: MPU6000
  • OSD: AT7456E
  • Firmware: MATEKF405
  • Weight: 7.2g
  • Mounting hole: M3 30.5 * 30.5mm
  • Support barometer, black box
  • Bluetooth 

 

5.8G 40CH 800mw VTX TX805P

  • Frequency: 5.8G Channels: 40CH
  • Input voltage: 7V~24V
  • 5V camera supply: 120mA(MAX)----25mW@12V 5V
  • camera supply: 200mA(MAX)----200mW@12V 5V
  • camera supply: 300mA(MAX)----600mW@12V 5V
  • camera supply: 350mA(MAX)----800mW@12V Extra
  • features: Smart audio
  • Power supply: 5V output for Camera
  • Output power: 25mW/200mW/600mW/800mW
  • switchable Antenna connector: MMCX
  • Cable connector: Solder pads
  • Weight: 8g(excluding antenna)

 

New Arrivals

More New Arrivals ›
BetaFPV Air65 Brushless Racing TinyWhoop ELRS

BetaFPV Air65 Brushless Racing TinyWhoop ELRS
APEX MICRO 4 Inch Frame Kit-FpvFaster

APEX MICRO 4 Inch Frame Kit

Save 7 SR
BetaFPV Cetus X Brushless Quadcopter FPV TinyWhoop Drone

BetaFPV Cetus X Brushless Quadcopter FPV TinyWhoop Drone

Save 22
APEX MICRO 3 Inch Frame Kit-FpvFaster

APEX MICRO 3 Inch Frame Kit
APEXDC EVO 5 Inch Dead Cat FPV HD O3 Frame Kit

APEXDC EVO 5 Inch Dead Cat FPV HD O3 Frame Kit

Save 5 SR
BetaFPV Meteor75 PRO Brushless 1S TinyWhoop FPV Quadcopter Drone ELRS

BetaFPV Meteor75 PRO Brushless 1S TinyWhoop FPV Quadcopter Drone ELRS