NewBeeDrone AcroBee65 BLV4 TinyWhoop

615.00 SR

Quantity

Featured Products

DOGCOM 5200mAh 6S 120C 22.2V LiPo Battery QS8 [DG]

330.00 SR 456.00 SR

ISDT K2 Air Dual Channel Smart Charger 2-6S AC DC 200w 500w 20A

513.00 SR 592.00 SR

SUNLU ASA 3D Printer Filament 1.75mm 1KG

71.00 SR 91.00 SR

TBS Crossfire Micro TX V2 Starter Set

422.00 SR

TBS Crossfire Diversity Nano RX

183.00 SR

Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]

114.00 SR

NewBeeDrone AcroBee65 BLV4 TinyWhoop BNF ELRS

Specifications:

Flight Controller： BeeBrain BLv4 ELRS
MCU: STM32F411
VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8Ghz Antenna
ESC: 12A BLHeliS Pre-Flash with Bluejay 0.16 target: S-H-40 48kHz
ESC Connector: JST-1.0 3Pin
OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
Receiver: ELRS2.4 Diversity receiver(ESP32 compatible with wifi&bluetooth firmware update) 2.4G T-Antenna(Top) & normal 2.4G antenna(bottom)
Flight Controller Weight: 6.5g(Include antennas and battery connector)
Flight Controller Size: Outer dimensions: 29x29x7.6mm
Flight Controller Holes: 25.5x25.5mm
Battery input: 1-2S
Uart2: Tx&Rx for ExpressLRS2.4G Receiver
Uart1: Tx&Rx free
Power Connector: NBD-PH2.0 connector
Motors: Flow 0802 19000kv
Frame: Cockroach65 Brushless Frame Clear Purple
Camera Mount: Goober Canopy Clear Purple
Propeller: Azi Tri-blade 31mm 1.0 Clear Purple

Firmware:

All firmware can be found on our Github Page

Note:

Binding process. power up the drone 3 times, on the third time you plug in power, the ELRS Receiver will get into binding mode. We are still trying to work on the ELRS firmware and make it able to just click the boot button to get into bind mode. Will get this update in the near future.