Menu
Cart 0

iFlight SucceX-E Stack F4 Flight Controller OSD + 45A 2-6S ESC 30.5x30.5mm

Featured Products

ISDT K2 Air Dual Channel Smart Charger 2-6S AC DC 200w 500w 20A

ISDT K2 Air Dual Channel Smart Charger 2-6S AC DC 200w 500w 20A

522.00 SR 590.00 SR
TBS Crossfire Micro TX V2 Starter Set

TBS Crossfire Micro TX V2 Starter Set

420.00 SR
TBS Crossfire Diversity Nano RX

TBS Crossfire Diversity Nano RX

182.00 SR
Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]

Infinity 1400mAh 6S 150C 22.2V LiPo Battery XT60 [DG]

114.00 SR
Matek M10Q-5883 GPS COMPASS Module

Matek M10Q-5883 GPS COMPASS Module

148.00 SR
RadioMaster Bandit ExpressLRS 915MHz ELRS RF 1W Module TX

RadioMaster Bandit ExpressLRS 915MHz ELRS RF 1W Module TX

329.00 SR 390.00 SR

iFlight SucceX-E Stack F4 Flight Controller OSD + 45A 2-6S ESC 30.5x30.5mm

FC // SucceX-E F4 V2.1 Flight controller

 

  • MCU：STM32F405
  • Gyro：MPU6000
  • Betaflight OSD：YES
  • Blackbox：8MB
  • 4X Uarts
  • 8 x Dshot/Proshot/Oneshot output
  • 8 x individual ESC power/ signal pads
  • 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
  • VTX telemetry: YES
  • WS2812 led Strip：YES
  • Baro: yes BMP280(I2C)
  • Beeper：YES
  • Input：2-6S（Max 8S）
  • BEC：5V / 3A
  • Firmware target : IFLIGHT_SUCCEX-E F4
  • Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm
  • Dimensions：36*36mm
  • Weight：6.6g


ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

  • Dimension: 40*43mm
  • Mounting Holes: 30.5*30.5mm/Φ3mm
  • Weight: 14.4g
  • Supports 2-6S Lipo input
  • EFM8BB21 MCU, 24Mhz Runs BLHELI 16.X Firmware
  • Current sensor: YES
  • BEC: NO
  • Supports: DShot150/300/600/1200/MultiShot/OneShot etc. 
  • Target: G-H-30 BLS 16.7

 

Package Included:

  • 1x  SucceX-E F4 V2.1 Flight controller
  • 1x 45A 4in1 ESC 
  • 1x Wire harness

 

    New Arrivals

    More New Arrivals ›
    RadioMaster Bandit ExpressLRS 915MHz ELRS RF 1W Module TX

    RadioMaster Bandit ExpressLRS 915MHz ELRS RF 1W Module TX

    Save 61
    SUNLU ASA 3D Printer Filament 1.75mm 1KG

    SUNLU ASA 3D Printer Filament 1.75mm 1KG

    Save 20
    SUNLU PETG 3D Printer Filament 1.75mm 1KG

    SUNLU PETG 3D Printer Filament 1.75mm 1KG
    RadioMaster Bandit BR3 ExpressLRS 915MHz ELRS TCXO Receiver

    RadioMaster Bandit BR3 ExpressLRS 915MHz ELRS TCXO Receiver
    RadioMaster TX16S Mark II Max Radio Controller Transmitter

    RadioMaster TX16S Mark II Max Radio Controller Transmitter
    RadioMaster Bandit Nano ExpressLRS 915MHz RF ELRS 1W Module TX

    RadioMaster Bandit Nano ExpressLRS 915MHz RF ELRS 1W Module TX

    Save 38

    Customer Reviews

    Based on 1 review Write a review